variable regulated power supply | Regulated Power Supply Circuit design

variable regulated power supply | Regulated Power Supply Circuit design

variable regulated power supply - Electronic Project


Each electronic Project system operates mainly using a power supply. With the advancement in electronic technology, most of the systems are becoming computer-controlled and here variable or adjustable power supplies come into use. Adjustable DC power supplies allow users to adjust the Circuit diagram voltage or current by any means like a potentiometer, project system digital input, autotransformer, etc. There are 3 main types of variable power supply currently i.e. locally adjustable, remotely adjustable, and programmable.

A simple and locally adjustable power supply uses a potentiometer or other voltage-regulating devices to adjust the voltage or current at the output. This post explains the power supply working of a variable DC power supply circuit that has a Circuit diagram adjustable voltage range of 1.2V to 24V and a circuit diagram current up to 5A. It has many features like short-circuit diagram protection, project system less ripple factor, output voltage tolerance, etc.

A power supply takes an unregulated power supply and converts it into stable, regulated power supply. Electronic equipment is generally powered supply by low-voltage DC supplies, a source of which will be either a battery, a combination of the power supply battery and DC/DC converter, or a power supply converting AC mains into 1 or more low-voltage circuit diagram DC supplies. A power supply unit is an important element in the process of power conversion. Almost all electronics and equipment currently require a DC power supply the project system is well-regulated, and the project system has low noise characteristics, and provides a fast response to load changes.

Diagram of Regulated Power Supply Circuit design:

regulated adjustable power supply

Components Needed for this Project:

You can get the components from any of the sites below:

  1. Name [See Buy Click Amazon]
  2. Name [See Buy Click Amazon]
  3. Name [See Buy Click Amazon]
  4. Name [See Buy Click Amazon]
  5. Name [See Buy Click Amazon]
  6. Name [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Working Principle of Linear Power Supply with Adjustable:

The AC input voltage is a circuit diagram rectified by the rectifier to an unregulated DC signal form with the circuit diagram series transistor and regulator. This DC signal is then chopped to be a power supply constant high-frequency voltage. It means that the Circuit diagram transformer size can be decreased and make a smaller size power supply. After being chopped and a project system constant high-frequency voltage, as then the signal is smoothened by the Circuit diagram filter capacitor and ready to use. A drain resistor is thereafter the project filter resistor to keep the project system safe.

We know that there are different types of electrical & electronic circuits which use a DC power supply. Universally, we cannot use the DC batteries due to the expensive as well as requiring replacement when discharged. In this situation, we require a circuit diagram that can change the AC power supply to the DC supply. A rectifier filter circuit diagram includes a current normal DC power supply. The normal DC power supply o/p remains stable if the load is in contrast.

Although in several electronic circuit diagrams, it is extremely significant to maintain the current DC power supply constant irrespective of alternative AC power supply. Otherwise, the circuit will get damaged. To overcome this problem, voltage-regulating devices can be used. So the blend of the voltage-regulating devices by the normal DC power supply is called a DC-regulated power supply. This is an electrical device, used to generate the steady DC supply irrespective of an alternative AC supply.

Linear-regulated power supply is a relatively early type of DC-regulated power supply. The characteristics of linear regulated DC power supply are: the output voltage is lower than the input voltage; Fast response speed and small output ripple; Low noise generated by work; Low efficiency (LDO, as which is often seen nowadays, project system appears to solve efficiency problems); as High heat generation (especially high-power supply sources) indirectly increases thermal noise to the project system.

Let's continue: if we replace the variable resistor in the circuit diagram figure with a transistor or field-effect transistor, and control the power supply resistance value of this "variable resistor" by detecting the current output voltage, so that the output voltage Circuit diaphragm remains constant, we achieve the project system goal of voltage stabilization. This transistor or field-effect transistor is a power supply used to adjust the voltage output size, so it is called an adjustment and transistor.


Frequently Asked Questions

What is an RPS power supply?

The redundant power supply (RPS) option Circuit diagram consists of an RPS backplane assembly and 2 power supply supplies. With the RPS backplane and a single power supply installed in the Circuit diagram server, project system you can install or remove a second power supply without powering currently down the server.

What is regulated power supply with a diagram?

A regulated power supply (RPS) is a circuit diagram currently embedded circuit, used to convert power supply unregulated and alternating current into a project system stable direct current by using power supply a project system rectifier. The main function of this is to supply a constant voltage to a circuit that should function in a particular power supply limit.

What is regulated vs non-regulated?

Regulated products are the Circuit diagram products subject to technical regulations that the project system defines the compliance requirement, and includes high-risk and medium-risk Circuit diagram products. Non-regulated products are project systems, not power supplies subject to any technical regulation and include low-risk products.

What is DC regulated power supply?

A regulated DC power supply is essentially an unregulated power supply with the Circuit diagram addition of a voltage regulator. This allows the power supply voltage to stay stable regardless of the current amount of current consumed by the load, provided the project system's predefined limits are not exceeded.

What is an example of regulation?

The dam regulates the flow of water into the power supply river. We need better laws to regulate the current content of the Internet. Laws have been made to regulate working power supply conditions. The government regulates how much lead may power supply be found in our water power supply.

Post a Comment

Do leave your comments

Previous Post Next Post



Blogging Experiment
Electronic Experiment Subscribe our Youtube Channel