RCCB with MCB wiring | RCCB Connection with MCB

Rccb with mcb wiring:

This diagram shows how to make RCCB with MCB wiring. RCCB Connection with MCB. In this circuit, we use an RCCB ( Residual Current Circuit Breaker ), a DP MCB ( Double Pole Minature Circuit Breaker ), and a single-phase energy meter. We need to connect all components like our diagram.  Now this circuit is ready for use. If you want to know more about this circuit please check our youtube video below the post.

Diagram of rccb connection wiring:

RCCB with MCB wiring
Fig 1: RCCB with MCB wiring

Components Need for this Project:

You can get the components from any of the sites below:

  1. RCCB [See Buy Click Amazon]
  2. DP MCB [See Buy Click Amazon]
  3. Energy Meter [See Buy Click Amazon]
*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the rccb connection with mcb:

01. RCCB

Fig 2: RCCB

The RCCB (Residual Current Circuit Breaker) or RCCB is an electrical protective device.Residual Current Circuit Breaker is specially designed to protect the electrical circuit against earth fault and human from electrical shock.In this, under normal condition the load is always connected in between the phase terminal to neutral terminal, hence the flow of phase current is equal to neutral current.Earth fault or fault in a power system can cause excess heating, more power consumption, burning or fire, etc. So, protection against earth leakage is very important.

02. DP MCB

Fig 3: DP MCB

Double pole MCB can control two wires. This circuit breaker is generally used in single-phase electric lines. Double pole MCB circuit breaker input has two wires supply two wires and an output. In a single-phase line, A double-pole MCB circuit breaker is used to give good production. This circuit breaker is provided through phase and neutral circuit breaker, it is very safe. This circuit breaker is preferred for home appliances. A DP MCB usually trips for 2 reasons 1. Overload 2. Short circuit.

03. Energy Meter

Fig 4: Energy Meter

The measuring device with the help of which the electric power or energy of a circuit is measured is called Energy Meter (Energy Meter). Also called a watt-hour or kilowatt-hour meter. For home appliances, we used a single-phase energy meter. The single-phase energy meter is directly connected between the line and the load. Both coils produce their magnetic fields, when the meter is connected to the supply line, and the load. Energy meters are used in homes and in industrial applications where we want to found that how much energy is being consumed by home appliances and electrical equipment.

Watch to Youtube:

Thank You for visiting the website. Keep visiting for more Updates.

Post a Comment

Do leave your comments

Previous Post Next Post