SSR with motor connection

SSR with motor connection:

This circuit diagram shows SSR with a motor connection. In this circuit, we use a DP MCB ( Double Pole Minature Circuit Breaker ), a selector switch, an SSR ( Solid State Relay ), and a single-phase motor. This circuit is very simple and easy to make. If you want to know more about this circuit please check our youtube video below the post. For more learning please stay with us.

Diagram of SSR with motor diagram:

Fig 1: SSR with motor connection

Components Need for this Project:

You can get the components from any of the sites below:

1. Selector Switch  [See Buy Click Amazon]
2. DP MCB [See Buy Click Amazon]
3. Single phase SSR [See Buy Click Amazon]
4. Single phase Motor  [See Buy Click Amazon]

Read Also:

Components used to make the Project_name:

01. Selector Switch

Fig 2: Selector Switch

Selector Switches Can be Rotated left, Right, or in The Center in Order to Open or Close The Electrical Contacts. The Function of a Selector Switch is To Control Devices as well as Switch Between a Minimum of Two or More Circuits. The perfect Use For a Selector Switch is When Used for Controlling an Output of a Device. Selector Switches Come as a Complete Unit Often listed as a Terminal Block Meaning the Selector Switch is a Complete Block Which Makes it Simple And easy to Install.

02. DP MCB

Fig 3: DP MCB

Double pole MCB can control two wires. This circuit breaker is generally used in single-phase electric lines. Double pole MCB circuit breaker input has two wires supply two wires and an output. In a single-phase line, A double-pole MCB circuit breaker is used to give good production. This circuit breaker is provided through phase and neutral circuit breaker, it is very safe. This circuit breaker is preferred for home appliances. A DP MCB usually trips for 2 reasons 1. Overload 2. Short circuit.

03. Single phase SSR

Fig 4: Single Phase SSR

Solid State Relays (SSR) a Radar System Operating Around a car When in Motion to Detect Possible Impacts With Obstacles, Walls, Such as Other Cars, and pedestrians, etc. So Safety Measures May be Triggered Automatically, Such as Pre-Tensioning of The Seat. Electrical Switches Are Typically Used to Operate, Switch Off, or On the Power Supply to The Circuits or Devices. In General, a Switch is Used to cut Off The Current Flow in The Circuit or Deviate it From One Conductor to Another Conductor.

04. Single phase Motor

Fig 5: Single phase Motor

Single-Phase Induction Motor is Very Simple in Construction, Economical, Reliable, and Easy to Repair And Maintain. Due to all these advantages, it is widely used in vacuum cleaners, fans, centrifugal pumps, blowers, washing machines, etc. It can run only by supplying 1 phase current through this motor. The main two parts of this motor are Rotor and Stator. Among them, the rotating part is the Rotor and the stationary part is the Stator. Like all induction motors, a single-phase induction motor consists of two main parts, the stator, and the rotor.

Thank You for visiting the website. Keep visiting for more Updates.