Single Phase ATS Connection Building | Single House Wiring

Single Phase ATS Connection Building Wiring:

An (ATS) automatic transfer switch is a device that automatically transfers a power supply from its primary source to a backup source when it senses a failure or outage in the primary voltage source. If you want more clear details about this diagram please check our youtube video at the below post.

ATS Wiring Diagram for single phase Line:

Single Phase ATS Connection Building
Fig 1: Single Phase ATS Connection Building

Components Need for this Project:

You can get the components from any of the sites below:

  1. Single Phase Energy Meter [See Buy Click Amazon]
  2. Power Generator [See Buy Click Amazon]
  3. ATS [See Buy Click Amazon]
*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the ATS Connection:

01. Single Phase Energy Meter

Single Phase Energy Meter
Fig 2: Single Phase Energy Meter

The measuring device with the help of which the electric power or energy of a circuit is measured is called Energy Meter (Energy Meter). Also called a watt-hour or kilowatt-hour meter. For home appliances, we used a single-phase energy meter. The single-phase energy meter is directly connected between the line and the load. Both coils produce their magnetic fields, when the meter is connected to the supply line, and the load. Energy meters are used in homes and in industrial applications where we want to found that how much energy is being consumed by home appliances and electrical equipment.

02. Power Generator

Power Generator
Fig 3: Power Generator

The Power Generator Is a Device That Converts Motive Power (Mechanical Energy) or Fuel-Based Power (Chemical Energy) Into Electric Power for Use in an External Circuit. In Addition to Electromechanical Designs, Photo Voltaic, And Fuel Cell-Powered Generators Utilize Solar Power and Hydrogen-Based Fuels, Respectively, to Generate Electrical Output. The Reverse Conversion of Electrical Energy Into Mechanical Energy is Done by an Electric Motor, And Motors, And Generators Have Many Similarities. Many Motors can be Mechanically Driven to Generate Electricity; Frequently They Make Acceptable Manual Generators.

03. ATS

Fig 4: ATS

An automatic transfer switch (ATS) is a type of intelligent power switching device controlled by the dedicated control logic and used with a diesel generator to automatically switch between mains and generator in case of power failure. A transfer switch (either manual or automatic) will perform the switching function to ensure an uninterrupted supply of electrical power from one of two power sources (usually mains and generator) to several connected loads (lights, sockets, motors, computers, electrical appliances, etc.). Which saves a lot of time and manpower and reduces the length of power outages.

Thank You for visiting the website. Keep visiting for more Updates.

Post a Comment

Do leave your comments

Previous Post Next Post